Search found 1715 matches
- Tue Jan 12, 2021 2:21 pm
- Forum: General Chat
- Topic: 2020 D Max Steering is dangerous
- Replies: 7
- Views: 1016
Re: 2020 D Max Steering is dangerous
Not sure if the new Mazda BT50 has similar or same system, I expect it has much the same and haven't heard of problems by Mazda owners. The TV ad for the BT50 says, "IT'S SMART", is the Isuzu dumb?
- Fri Jan 08, 2021 3:00 pm
- Forum: D-max Build Ups
- Topic: repack / replace front bearing grease
- Replies: 1
- Views: 121
Re: repack / replace front bearing grease
30,000km? used to be 40,000km on earlier models. If sufficient quantity and quality of grease is used and even a dash of Nulon G70 the bearings will last much longer and using that method I do mine at longer intervals. Originally they don't have an over abundance of grease. The more important issue ...
- Fri Jan 08, 2021 2:44 pm
- Forum: Drive Line Componentry
- Topic: Front wheel hub regrease
- Replies: 16
- Views: 9185
Re: Front wheel hub regrease
It seems anyone who can recognize a wheel bearing can do the job. He didn't evenly undo the drive plate on the hub, just rattled off in a rotary pattern. Hope he never works on anything which requires even removal or reassembly. The grease seemed quite new and unused. I wonder why Nic has the bearin...
- Fri Jan 08, 2021 2:14 pm
- Forum: Introductions
- Topic: HELLO From Ga
- Replies: 4
- Views: 245
Re: HELLO From Ga
G'day Danno I thought what a lovely lady looking for a partner. Just not interested that far away. Yes, George Soros and Bill Gates are totally in charge now. I wonder when Biden's "accident" is going to happen? He can't keep getting instructions through the hearing aid/earpiece forever, that must b...
- Thu Jan 07, 2021 3:19 pm
- Forum: Introductions
- Topic: HELLO From Ga
- Replies: 4
- Views: 245
Re: HELLO From Ga
Hello Grace,
Good to have some people from USA on the site. Unfortunate you now have the communist George Soros as President though. A master puppeteer, he pulls the strings and people dance.
Cheers
mydmax
Good to have some people from USA on the site. Unfortunate you now have the communist George Soros as President though. A master puppeteer, he pulls the strings and people dance.
Cheers
mydmax
- Fri Jan 01, 2021 4:05 pm
- Forum: General Chat
- Topic: Happy New Year MY21
- Replies: 3
- Views: 396
Re: Happy New Year MY21
Thanks, and hope 2021 is more rewarding than '20. I haven't worn mine out yet so another who will keep the present vehicle. It turns 10 this year.
- Tue Dec 15, 2020 10:07 am
- Forum: D-Max/Colorado 2007 to 2012
- Topic: 09 Temp guage reading and TPM warning
- Replies: 2
- Views: 530
Re: 09 Temp guage reading and TPM warning
I have a 2011 Dmax and the temp gauge runs slightly over the midway point. If yours runs 3/4 then either the thermostat is a hotter thermostat or there is a restriction to airflow or cooling water flow issue. If you place the vehicle under more load the temp may rise slightly IF the thermostat is th...
- Mon Dec 14, 2020 6:38 pm
- Forum: Electrical Stuff
- Topic: Work Lights
- Replies: 5
- Views: 632
Re: Work Lights
If for mirrors or for headlight adjusting power supply I would be finding which fuse and it's rating if using it to power other items. The wires aint thick. If light duty and LEDS are tolerant to voltage drop over the distance all maybe ok. Personally, I would run a separately fused power wire from ...
- Wed Dec 09, 2020 2:13 pm
- Forum: General Chat
- Topic: 2020 D Max Steering is dangerous
- Replies: 7
- Views: 1016
Re: 2020 D Max Steering is dangerous
If you fit a small 12v relay to momentarily bridge the contacts/pins of the switch which turns the system OFF when at startup. the system will be OFF. To set the relay ON time, fit an electrolytic capacitor to the positive side and other side of the cap to negative. When starting, the relay gets a s...
- Sun Dec 06, 2020 6:53 pm
- Forum: Electrical Stuff
- Topic: Steering wheel control wires
- Replies: 5
- Views: 10597
Re: Steering wheel control wires
I haven't changed one with steering controls, but logic, if applied can provide positive results. IF, yes IF, you open the case of the old one you may find the various pins of connectors are identifiable by code or names on circuit board. Also, logic means if most pins are for aerial or speakers or ...