ambient temperature display not reading anything
ambient temperature display not reading anything
Ambient temp sensor replaced and wiring checked all clear but still no display on the dash at all. Have been to dealers twice and auto elec once. Where's the best place to go next?
Re: ambient temperature display not reading anything
Introduce yourself a bit at least and then go back to Isuzu, it's a warranty issue.2013 dmax wrote:Ambient temp sensor replaced and wiring checked all clear but still no display on the dash at all. Have been to dealers twice and auto elec once. Where's the best place to go next?
Cheers
Dan
Moderator
Google search trick- site:newd-max.net search term here
http://www.newd-max.net/viewtopic.php?f=13&t=1684
Build thread http://www.newd-max.net/viewtopic.php?f=16&t=549
Dan
Moderator
Google search trick- site:newd-max.net search term here
http://www.newd-max.net/viewtopic.php?f=13&t=1684
Build thread http://www.newd-max.net/viewtopic.php?f=16&t=549
Re: ambient temperature display not reading anything
Thanks.
Will do, and will post results when solved for reference.
Will do, and will post results when solved for reference.
Re: ambient temperature display not reading anything
Any resolution to this fault. Ive just noticed the same issue after picking the vehicle up from the panel beaters. Its also screwed up the air con...
Re: ambient temperature display not reading anything
I found the panel beaters had left the two plugs undone from the tow bar relays for the trailer lights etc. plugged back in. Reset ecu. All working again.
Re: ambient temperature display not reading anything
Yep, most vehicle problems after any work or even long time after any work or service is nearly always related to humanoids of some description. Lucky it wasn't a 737 on takeoff and airspeed unplugged. At least your Dmax doesn't nose down to eternity.