ambient temperature display not reading anything

Post Reply
2013 dmax

ambient temperature display not reading anything

Post by 2013 dmax »

Ambient temp sensor replaced and wiring checked all clear but still no display on the dash at all. Have been to dealers twice and auto elec once. Where's the best place to go next?
Danno
Posts: 3283
Joined: Sun Oct 20, 2013 1:23 am
Location: Darwin... sort of.

Re: ambient temperature display not reading anything

Post by Danno »

2013 dmax wrote:Ambient temp sensor replaced and wiring checked all clear but still no display on the dash at all. Have been to dealers twice and auto elec once. Where's the best place to go next?
Introduce yourself a bit at least and then go back to Isuzu, it's a warranty issue.
Cheers
Dan
Moderator
Google search trick- site:newd-max.net search term here
http://www.newd-max.net/viewtopic.php?f=13&t=1684
Build thread http://www.newd-max.net/viewtopic.php?f=16&t=549
2013 dmax

Re: ambient temperature display not reading anything

Post by 2013 dmax »

Thanks.
Will do, and will post results when solved for reference.
Hanra
Posts: 32
Joined: Wed Nov 30, 2016 12:58 pm

Re: ambient temperature display not reading anything

Post by Hanra »

Any resolution to this fault. Ive just noticed the same issue after picking the vehicle up from the panel beaters. Its also screwed up the air con...
Hanra
Posts: 32
Joined: Wed Nov 30, 2016 12:58 pm

Re: ambient temperature display not reading anything

Post by Hanra »

I found the panel beaters had left the two plugs undone from the tow bar relays for the trailer lights etc. plugged back in. Reset ecu. All working again.
mydmax
Posts: 1820
Joined: Sat Oct 12, 2013 8:36 pm

Re: ambient temperature display not reading anything

Post by mydmax »

Yep, most vehicle problems after any work or even long time after any work or service is nearly always related to humanoids of some description. Lucky it wasn't a 737 on takeoff and airspeed unplugged. At least your Dmax doesn't nose down to eternity.
Post Reply